Systemstatus des Raspberry Pi erfassen: CPU Temperatur

Hier wird alle 30 Minuten das Wetter aus Langenhagen via eines Raspberry Pi gesendet

A Raspberry Pi + DHT22 used to monitor temperature and humidity in one of the rooms in KSJ

Data log of my TI SensorTag data

Projekt Wetterstation Nürensdorf

Logging data from a Raspberry Pi SenseHat

This channel measures temperature and humidity of AH1-SC306.

A simple channel to log temperature and air pressure.

Raspberry BCM2711-CPU's temperature monitor. Data reading from the /sys/class/thermal_zone file. The RasPi pin GPIO4 connected an Dallas DS18b20 sensor. Field-2 present the room temperature. Channel update every two minutes.

라즈베리파이로 만드는 IOT플랫폼

Uses Raspberry Pi with Dallas DS18B20 sensors and BMP180 for pressure. Uses udp comms to Wemos D1 mini for switching relays for pump and pond heater. Monitors Koi pond temperature and shack (with water pipes in loft) sending email and ThingTweet update

Test data from PI for future weather station

Private weather station at Rolan Mountain, Lennestadt. Elevation: 299m above sea level. Measurements: Temperature, humidity, soon: barometric pressure. Measuring interval: 15 seconds.

Multiple Wemos D1 Minis with Dallas ds18b20 sampling temperatures updating via UDP over local network to Wemos D1 Uno board for tx to Thingspeak. Raspberry Pi triggers D1 when to tx over udp as Wemos has no time clock. Propagator Wemos monitors temper

Rob's DHT11 temperature sensor connected to a Raspberry Pi 3B+ located in the demo lab server room at the office.